www.Pulse-Motor.co.uk

Pulse Motor | Bedini Motor | Overunity Motor

       

Do you want to make a start on the future of energy? 

Don't Know Where To Start ?

Would You like a Kit, Plans & DVD to Get You Started

 

Hello my Name is Phil

I was in the same position a few months ago ! 

By the time I had  built my first motor my head was spinning with electronics and new stuff and obviously the ultimate goal of free energy and transport etc, it was all a bit too much to start with and everyone on the forums I've been on seems so far ahead I thought I'd never catch up.

But Now I have my first motor and its fascinating! I built something that spins from scratch ! Its a Bedini pulse motor ( very clever man) and now I've already ordered up a specially cut set of neodymium magnets for the next project! Which if you add your name and email below I'll let you know when the next project is complete.

Now, I used to be a mechanic so I've rebuilt starters and alternators and even made a DVD on how to do it and I've got a hydrogen kit on my car also but this is totally different and unique. 

So to make it easier for you to get started I've sourced all the bits for you to make one from scratch, I'm not trying to take all the fun out of it by presenting you with a finished product which is patented anyway, far from it, there's  just all the component parts you'll need to make your Bedini pulse motor without having to trawl the net for info, components and blurry unclear diagrams of the Bedini circuit. I just want to make it easier for anyone with an interest in this and energy stuff to get started and we'll progress to bigger and better stuff as we go. 

So further down the line we'll see about finding some information on electromagnetism and understanding  exactly how it works, also magnetic motors look very interesting and definitely worth some investigation and when I write about it as usual it will be in terms that WE can understand as I'll be learning as we go and some of the information only products are a bit harder to understand so we'll try to decipher what we learn into easily understandable English.

John Bedini named this motor the SSG which means simplified or simple schoolgirl motor as a ten year old schoolgirl made it as a science fair project and won. There are more projects coming like  the schoolboy motor.

I also have some ideas for the electric car project for which I want to try and make a simple wheel motor system using permanent magnets and some home made coils which will reduce lots of extra drag and friction. If that is viable then I see no reason why we cant make a pulse motor powered speedboat, motorbike and lots more I'm sure will come to mind.  

Before you forget! Add your name and email below for reminders in the future.

Name
Email

 

Bedini Pulse Motor Kit 

 

 

All the electronic components in the kit

 

No Soldering Necessary with this kit

 

 Yes You Get to wind your own bifilar coil ! BUT on the DVD I show you how to do it in less than half an hour !

 

Assembled in an afternoon

 

Circuit Diagram The Simplest bit! 

 

DVD showing you every detail SO You Cant Get It Wrong

  47.00 + P+P Worldwide postage 

The Bedini pulse motor kit contains

4 Magnets (Neodymium)

Prototyping board (for attaching the components without having to solder and allowing us to update to the next when were ready)

Circuit diagram 

Electronic components (2 sets just in case you drop 1)

Rolls of enamelled copper wire ( to make the coils)

150 mm Plastic wheel (to use as a rotor)

Battery connector  (for 9v bat)

The DVD of course  in which you'll see every detail on how to assemble your first motor and get it running 

 

If you want to make a start learning about the future of energy and maybe one day even free energy we can generate ourselves then this is where to start. You should read about Nikola Tesla, Tom Bearden, John Bedini, Edwin Gray, Howard Johnson and Many more names and researchers will come to your attention. Magnetic Motors and Overunity motors are also something we will look at as we progress.

I think that we should all be chasing this information and learning from it and especially try and interest your children in the energy of the future.

I'm no activist but I'm positive that inventions and solutions to the global energy crisis have been hidden and suppressed to keep us all plugged into the grid one way or another because without  the worker ants (us!) economies would collapse and the 2% of the planet that has the wealth and power would no longer dictate how we use energy and live our lives.

Pulse Motor Description

A pulsed motor, unlike normal A/C or D/C types, uses short pulses of current to drive the motor, making it spin. The part of the motor that spins is called the rotor. Typically, it is quite heavy, acting as a flywheel, and has multiple permanent magnets spaced equally around its periphery. These magnets are usually extremely strong and can be arranged in a variety of different configurations. 

The stator is the stationary part of the motor that surrounds the rotor. It holds one or more electrical coils. They are positioned so that the magnets line up with the coils during part of the rotation. The coils are energized when they are exactly lined up with the permanent magnets in the rotor. This requires very precise timing, usually achieved through some type of electronic control circuit and the diagram shows how simple this can be.

The  copper coils are normally wound so that, when energized with a short pulse of current, they produce a repulsive force. This repulses the magnet in the rotor, causing it to rotate. After being energized by a short pulse, the magnetic field formed around the electrical coil then collapses. As it collapses a current is produced in the coil (sometimes called "back EMF" - electromotive force). This current is small but valuable and can be harnessed, stored or otherwise utilized but that will be in one of the next projects.

Ok now a complicated phrase!

This current is equal to the input energy, minus resistance and heat losses, and is the feature of the pulsed motor that is exploited by most free energy researchers who work with pulsed motors.

This means that the energy coming back out is the same as the power put in but you have to subtract the power that was wasted heating the copper coil and other power used to overcome friction and resistance.

In theory, after rotational torque is produced in the rotor, the energy input may be recovered minus these losses. Therefore, the torque produced in a pulsed motor is "free" energy and may be utilized to generate current or torque in excess of the input power that is partially recovered. This is the difficult part. For a PMG to be most efficient:

The circuitry of pulsed motors consists of two prime functions.

  1. Controller power circuits that produce the rotational torque by delivering pulses to the electrical coils at a precise moment during the rotation of the motor.

  2. Harvesting circuits that store back EMF (energy coming out) and also any power generated by the magnets moving past other wound coils to produce power.

Conventional AC or DC motors simply consume electrical power at a steady rate with no regard for energy recovery. Inventors working with PMGs are keenly focused on recovering every bit of available back-EMF energy. The closer they get to this goal, the closer they are to creating a "free energy" motor. If such a motor is possible it can be used to drive an electrical generator thereby providing "free energy" for a home, business, or industry. We'll move on to collecting back EMF in one of the next projects and gradually build up to a full spec motor learning as we go through hands on experiment.

 

Sounds Complicated ?

I thought so when I started looking into it but now I've built my first simple motor from scratch and you can too no doubt about it! After repairing starters and alternators as a job I can honestly say that this was far more rewarding but if you are interested in my previous DVDs then go to www.Diy-Dvds.com and the hydrogen experiment is there too. 

I'm going to filter information, experiment and investigate all the ideas out there and like the pulse motor kit when I find things that work I'll email all my subscribers an invitation to look at the next project be it written, video or other so add your name below !

As usual all my DVDs are high def and very close up detail and descriptions 

  47.00 + P+P Worldwide postage 

Name
Email

If you have want to write an article or piece for this site then send it in a word document and if its relevant to the subject I'll put in up here. It will need to be written as if for someone with no knowledge of anything to do with this subject.

I want to progress quickly with these projects and this website so any help advice or content is welcome.

email Phil@pulse-motor.co.uk

This is a few feedback comments on my previous DVDs 

"best DVD I have watched in a long time very entertaining"

"A well done & informative CD"

"GREAT ITEM FAST DELIVERY THANK YOU!!!!!!"

"yeh good get your hands dirty stuff .recommended"

"Quick delivery. Very educational DVD. Haven't finished watching but very happy.Thanks"

"Great DVD. Packed with practical advice. Friendly style with humour thrown in."

"Excellent informative DVD, quick delivery I can't wait for the follow up. Thanks"

"great delivery DVD looks great will be very useful A++++++++++++++++++"

"fantastic just buy it now, you wont regret it.100 stars.************************"

"brilliant DVD shows just what can be achieved, cant wait for the next one, thanks"

"Very informative DVD and worth purchasing if only for reference. Many thanks."

 

 

The Pioneers

Nikola Tesla

John Bedini

Howard Johnson

Tom Bearden